Industry information_News_Guangzhou FUZELONG Hygiene Material

/

/

Industry information

NEWS



Do you know which medical equipment is consumable?

Do you know which medical equipment is consumable?

Disposable medical kits include: 1. Production kit 2. Catheterization kit 3. Surgical kit 4. Central venous catheter kit 5. Hemodialysis catheter kit 6. Puncture kit 7. Dressing change kit, skin preparation kit 8. Oral care kit 9. Tracheal tube bag, sputum suction bag 10. Stomach tube bag, bite material bag 11. Enema bag, first aid kit

Release time : 2021-12-21

Demand for high-value medical consumables has surged, and the "high-value medical consumables management system" helps hospitals upgrade

Demand for high-value medical consumables has surged, and the "high-value medical consumables management system" helps hospitals upgrade

As an important "weapon" in the diagnosis and treatment of new coronary pneumonia, medical consumables are not available. After the epidemic, ICU will become the focus of the construction of hospitals above the second level, and the demand for high-value medical consumables related to this has also continued to surge, which means that the consumables management model supporting it also needs to develop rapidly. In the era of medical information technology, the improvement of management level must be inseparable from the introduction of new technology. High-value consumables have the characteristics of high value, strong specificity, and difficult management, so they are the top priority of the management of consumables in major hospitals. It has always been one of the problems in the management of major hospitals. The traditional management method uses manual methods to complete the registration, approval, and accounting procedures, but this method actually has many drawbacks. Once the consumables are recalled due to quality reasons, they can only be manually searched from the medical records, and the efficiency and accuracy are low. , It is impossible to check which patient the consumables are used in time, and high-value consumables enter the clinical department without permission and passively pay. The equipment department cannot carry out effective supervision and zero inventory management, resulting in high cost of consumables...These can no longer meet the management needs of modern hospitals for high-value consumables, and refined management is required to meet the current high-value consumables management needs of the equipment department. In the field of high-value consumables management, CMEC Software is the first to engage in the research and development and application of systems in this industry, and is also the most efficient national high-tech enterprise.

Release time : 2021-12-21

Process Validation

Process Validation

Process verification is the most important kind of medical device verification work, and its purpose is to verify whether the adopted production process can stably produce qualified products. Process verification is a synthesis of many key process verifications. One of the key points in drawing up a process verification plan is to determine the key processes. Generally, selection has the greatest impact on product quality, or additional processes such as components and key circuit connections are added.

Release time : 2021-12-21

Sterility verification

Sterility verification

For high-risk medical device products, sterility verification is particularly important. It is used to verify that the sterilization process used (in special cases, the sterile production process is used) can ensure the sterility of all products that are finally marketed, and it is to ensure safe clinical use The key link. The key to aseptic process verification is to ensure that all products can be effectively sterilized, and that the inspection methods used under normal production conditions can detect abnormalities in the sterilization equipment in time.

Release time : 2021-12-21

Scenarios for masks:

Scenarios for masks:

Medical disposable masks: worn in general medical environments to block the oral or nasal cavity from exhaling or spraying pollutants.

Release time : 2021-12-21

Principles of manufacturing disposable medical masks

Principles of manufacturing disposable medical masks

Disposable medical masks belong to Class II medical devices. The production of masks has high requirements on equipment, production environment and personnel. The entire production process of masks needs to be in a 100,000-class dust-free clean room (diameter per cubic meter of air ≥ The number of 0.5μm particles is not more than 3.52 million. The less the number of particles in the air, the less the number of dust and microorganisms, the cleaner the air). Whether the mask production workshop meets the dust-free and clean requirements will directly determine whether the masks produced meet the specified requirements.

Release time : 2021-12-21

What are the common masks?

What are the common masks?

The most frequently mentioned masks now include KN95, N95, medical surgical masks and so on.

Release time : 2021-12-21

What are the standards for masks?

What are the standards for masks?

At present, the main standards for masks in my country include GB 2626-2006 "Respiratory Protective Equipment Self-priming Filter Type Anti-Particulate Respirator", GB 19083-2010 "Technical Requirements for Medical Protective Masks", YY 0469-2004 "Technical Requirements for Medical Surgical Masks" , GB/T 32610-2016 "Technical Specifications for Daily Protective Masks", etc., covering labor protection, medical protection, civil protection and other fields.

Release time : 2021-12-21

The production process of masks

The production process of masks

To talk about the production process of masks, we must first talk about the core raw material of masks: non-woven fabrics. Non-woven fabric is non-woven fabric. Although it is called non-woven fabric, the formation of non-woven fabric still needs fiber? Some friends may wonder, isn’t cotton fiber? Isn’t it possible to use cotton? The answer is no. You don't need cotton but also use fiber. Of course, you choose synthetic fiber!

Release time : 2021-12-21

Cleaning and disinfection of common equipment and instruments

Cleaning and disinfection of common equipment and instruments

1. Cleaning and disinfection of simple breathing bag ①When there is no obvious visible pollution to the naked eye → wipe with 75% alcohol; ②When there is obvious pollution, disassemble the breathing bag to the smallest unit, put the duckbill valve, plastic connector, face mask, etc. → soak in 500mg/L chlorine disinfectant for 30 minutes → rinse with running water and dry → balloon and oxygen The air storage bag is wet-wiped with a towel soaked with 500g/L chlorine-containing disinfectant → wiped with clean water → inspected, tested and assembled for use;

Release time : 2021-12-21

Previous

1

Next

LONGO CUSTOMS SERVICE

Non-woven materials experts

MENU

PRODUCTS

> Infection prevention

> Surgical solution

> Daily products

JOIN OUR NEWSLETTER

Username used for comment:

客户留言

Description:

* Message contents：

Name：

Gender：

male

female

Mobile phone：

Telephone：

Fax：

E-mail：

Address：

Postal code：

* Verification code:

验证码

Copyright 2021GUANGZHOU FUZELONG HYGIENE MATERIAL Co.,Ltd All rights reserved. 粤ICP备2021175212号 | Powered by www.300.cn