1. Cleaning and disinfection of simple breathing bag
①When there is no obvious visible pollution to the naked eye → wipe with 75% alcohol;
②When there is obvious pollution, disassemble the breathing bag to the smallest unit, put the duckbill valve, plastic connector, face mask, etc. → soak in 500mg/L chlorine disinfectant for 30 minutes → rinse with running water and dry → balloon and oxygen The air storage bag is wet-wiped with a towel soaked with 500g/L chlorine-containing disinfectant → wiped with clean water → inspected, tested and assembled for use;
2. Cleaning and disinfection of oxygen mask/anaesthesia mask
①When there is no obvious visible contamination to the naked eye → wipe with 75% alcohol.
②When there is obvious pollution → soak in 500mg/L chlorine-containing disinfectant for 30 minutes → rinse with running water and dry.
3. Cleaning and disinfection of the ventilator
①The surface of the ventilator → wipe with clean water every day → wipe with 75% alcohol at the end;
②When there is obvious pollution→use 500mg/L chlorine-containing disinfectant for 30 minutes→wipe with clean water. ③The external circuit of the ventilator includes the threaded tube of the ventilator, Y-connector, humidifier, water collection cup, etc.→500mg/L chlorine disinfection and soaking for 30 minutes→washing with running water and drying. The dust-proof mesh pad is cleaned and replaced regularly according to the product instructions.
4. ECG monitor, micro pump, infusion pump
①When there is no visible pollution to the naked eye → wipe with clean water every day → finally wipe with 75% alcohol (the ECG lead wire is not polluted with clean water for final disposal) → patients with multi-drug resistant bacteria → use 500mg/L chlorine disinfectant for 30 minutes →Wipe with clean water.
②When there is obvious pollution→use 500mg/L chlorine-containing disinfectant for 30 minutes→wipe with clean water.
5. Cleaning and disinfection of the defibrillator You can wipe the defibrillator with clean water daily to keep it clean. Final treatment: The defibrillator can be wiped with clean water, and the electrode plate can be wiped with 75% alcohol. (Or follow the instructions)
6. Cleaning and disinfection of the incubator The incubator in use → wipe with clean water every day → continuous use for 7 days or after the newborn is discharged from the hospital → terminal disinfection.
① Disassemble the incubator to the smallest unit → operate the window plastic cover and sealant ring with 500mg/L chlorine-containing disinfectant soak and disinfect for 30 minutes → rinse with running water → wipe dry with a clean towel
② Water tank, plastic board → Rinse with running water → Wet wipe with a towel soaked with 500mg/L chlorine disinfectant → Wipe with clean water again.
③ Constant temperature cover, temperature controller, crib, mattress, bed partition → Wet wipe with a wool towel soaked with 500mg/L chlorine disinfectant → then wipe with clean water.
④ The incubator after use by newborns infected by infectious diseases or multi-drug resistant bacteria should be disinfected with 1000mg/L chlorine disinfectant. Clean and disinfect the installed incubator, paste the name of the disinfectant and the disinfection time for later use. The air filter mat in the incubator is replaced every 2 months or cleaned and replaced regularly according to the product instructions.
7. Cleaning and disinfection of sphygmomanometer
①Clean the cuff once a week without contamination
②When it is contaminated by blood/body fluids → soak and disinfect the cuff with 500mg/L chlorine-containing disinfectant for 30 minutes → rinse with running water and dry for later use.
8. Cleaning and disinfection of the clinical thermometer After using the clinical thermometer → soak and disinfect with 75% alcohol for 30 minutes → dry and store for later use. The disinfectant is changed daily.